Skip to main content

Harper.



Not wanting to spread unnecessary negativity I'm first going to briefly write a happy-joy version about this hat, giving you the option of skipping all the annoyance and foul mood this pattern caused me later on in this text.

I really like how this hat (eventually) turned out. It is exactly what I was looking for: minimalistic, light-weight and impossibly soft (thanks to the Lamana Cusco which feels like hugging a kitten). It's certainly not thick enough to brave the winter chills, but I'm embracing the capsule wardrobe ideology and knitting for the season at hand, and the hat is perfect for this time of the year: when you can almost pretend it's summer in a sunny and windless spot, but around the corner the cold can still take you by surprise.

Before I started to focus more on my wardrobe and concentrating on knitting things that I really love to wear, all my hats were of bright colors so it's now nice to have a simple and neutral colored cap to go with everything. I also like how versatile it is: you can either wear it as an easy going slouch or a cute little beanie with the brim doubled up.

The use of two different yarns and twisted stitches make an interesting texture and I think the hat has the timelessness and classic features of something that could have been bought in a high end fashion store. Even with it's simplicity it surely doesn't look like a DIY project.  



Pattern:  Harper by Julie Hoover
Yarns: Lamana Cusco #00 natur wool white,
Novita Victoria (from my mum's stash)
Needles: 3.5mm

Stop reading now if you don't want to read me complaining.
-------------------------------------------------------------------------------------------------------------------

This is the first time I'm disappointed with a Brooklyn Tweed pattern.

First of all: I find the pricing of this hat a bit outrageous. I think all the BT patterns are slightly overpriced but usually gladly pay the few extra euros because the patterns are very well executed, the designs great and I usually learn some new piece of technique from them. But for a hat pattern costing over 8 euros I would have expected a little more than what is basically nothing else than twisted ribbing in two colors.

I wanted to knit something simple, with a great texture, and I thought I found the perfect pattern. I was really curious about the texture that was described as having "a woven effect". I think they have deliberately left out a close-up photo of the texture so that you wouldn't figure out how easy it actually is.


If you can summarize the whole pattern into just two-color striped hat in twisted ribbing with a tubular cast on and with the gauge and needle sizes listed on the pattern page, I don't think the effort of figuring out the number of stitches to cast on or how to decrease at the top is really worth 8 euros. I feel bad about spoiling that much of the pattern for you but to be honest, it's all said right there on the pattern page on Ravelry so the only things you really are paying for is the stitch count and crown shaping.

Even though the price vs. the technical merits of the pattern didn't quite add up in my opinion, all this could've been forgiven and forgotten had it not been for the fact that the pattern does not even work. I know I made a mistake not making a swatch but my knitting "hand writing" usually matches the BT gauge really closely. I should have made one though: that would have confirmed my doubts about the combination of fingering weight yarn, size 5.0mm needles and twisted stitches. As you might suspect the end result is like a net and however lightweight the cap is supposed to be I'm convinced that a hair net is not the intention.

Feeling stupid and like I'd missed a crucial piece of information I looked and looked, read and re-read for the hidden phrase "hold the yarn double" but it does not exist. According to the pattern you really are supposed to knit twisted ribbing with fingering weight yarn and size 5.0mm needles. I regret that I didn't take a photo of the net-like fabric before ripping it all apart.

My first attempt at knitting the hat was with sport-weight DROPS Baby Alpaca Silk with a similar color scheme as the hat I ended up knitting. When it didn't work I changed to DK weight yarn and started again from the beginning. I quickly noticed that even this wouldn't do the trick if I didn't also go down in needle sizes.


Third time around I couldn't bring myself to do the tubular cast on yet again so I skipped it and started with a long-tail CO, my trusted friend. I started with 3.5mm needles with the plan of changing to something bigger a little further along, but I thought the gauge was perfect with that needle size so I decided to stick with it until the end. If I'm to knit this again, I would start with 3.0mm needles to get a tighter brim and then change for the 3.5mms for the body.

In the end the hat works and I'm really happy about it. I'm just a bit sour after having to modify the pattern so heavily to get the end result I was looking for.
-------------------------------------------------------------------------------------------------------------------

The short version of my modifications for the pattern: 
  • long-tail CO instead of tubular CO
  • DK weight yarn instead of fingering weight
  • knitting the whole thing with 3.5mm needles, and not changing for anything bigger at any point
 -------------------------------------------------------------------------------------------------------------------

P.S. P-tbl stitches are a pain in the a** to knit. They do get more meditative the further you knit, but never to a point where you could call them "a joy".



Comments

  1. Kiva, että lopputulos oli mieleinen. Heheh, osataanpa siinä ottaa hinta ihan perusmallista. Luulenpa, että jostakin löytyy jo ennestään ihan ilmainen ohje samanlaiseen pipoon.

    BT:n ohjeissa harrastetaan tätä tubular-luontia. Tarpeettomasti. Erityisen joustavaa reunaa ei tarvitse, ellei ole erikoisen kapea pääntie tai helmaresori, tai vastaava, jossa resori asettuu paljon kapeampaan kohtaan kuin se mitä siitä on ensin vietävä läpi, vrt. kaula - pää. Pipon alareuna harvemmin kinnaa (no ehkä joku iso kampaus voisi olla leveämpi kuin päänympärys, mutta silloin pipokin olisi ylhäältä leveämpi kuin alareunasta). Tavallinen, joustava luonti riittää, ja on makuasia, mikä tapa on mukavamman näköinen. Käyttäisin itsekin mieluummin ihan tavallista (long-tail) luomista.

    ReplyDelete
    Replies
    1. Joo olen huomannut tuon ihan saman tubular-luonnin liikakäytön. Joskus se antaa ihan kivan säväyksen resorin reunaan mutta yleensä se on mielestäni vain turhaa hifistelyä. Tässä tapauksessa tuntui pakolliselle lisälle jotta saataisiin jotain substanssia muuten liian yksinkertaiseen ohjeeseen.

      Delete
  2. I really appreciate you being so honest about the pattern- we need more people to say things like that! While I completely understand that we all want to be supportive, BT patterns are very expensive, and it's disappointing to pay so much for something really basic.

    ReplyDelete
    Replies
    1. I wouldn't have complained had the pattern actually worked like it was supposed to. Being an experienced knitter I knew how to fix the mistakes, but if I had bought this when I was only starting out it would have made me really disappointed. There's nothing wrong with simple designs - not everything needs to be rocket science - but if the pattern is this basic I think it should also be written fool proof.

      Delete
  3. You are definitely correct. I just bought this pattern to actually pay for the crown and cast on. However, even the crown decrease is confusing. I am not new new to knitting but the written instructions are not great. In the decrease, it says to decrease in every other round 3 more times. However, what is the pattern for the round that is in between the decrease rounds? I am assuming that you knit in pattern. But, I am confused about how to approach the TD2-R stitch--do I P-TBL or K-TBL, bc if I P-TBL I am no longer in pattern. This pattern is expensive and I don't think I can knit it now b/c of the confusion. I actually write all of my knitting patterns out in Excel to visualize patterns out before I knit.

    ReplyDelete

Post a Comment

Popular posts from this blog

Salut Chéri! Beret Pattern.

Here is the pattern for the berets I've knitted. The name for the beret is from the t-shirt I was wearing when I took the project photos of the first beret for Ravelry. I thought the name suited the beret, since it's quite classical take on the hat that has become the icon of everything French. Happy knitting! Salut Chéri! You need:  yarn: 105-125 m (114 - 137 yards) worsted weight yarn. The sample was knitted with Novita Joki ( 104 m or 114 yard per 50g) needles : 3.5 mm and 4.0 mm (US size 4 and 6) circular needles (40 cm or 16 inches) size 4.0 mm (US size 6) DPNs 6 stitch markers , one of a different color to indicate the beginning of the round Gauge : 10 sts and 16 rounds = 5 cm (2 inches) in straight Stockinette stitch with 4.0 mm needles Cast on 88 sts on 3.5mm circular needle. Join in round, careful not to twist the stitches. Place a marker to indicate the beginning of the round. Knit in straight Stockinette stitch (knit all

Cloud Mittens - the Pattern part 1.

This is so long overdue, but I have now finally managed to write down the pattern for the Cloud mittens. Here it is, my Christmas present to all you guys! Enjoy! CLOUD MITTENS ( Here is the link to the pattern on Ravelry ) You need: 125 m or 135 yards of DK weight yarn (blue sample knit with Novita Wool, 100% wool, 135 m/ 50g) 125 m or 135 yards of sport weight yarn for the lining (blue sample: Garnstudio Drops Baby Alpaca Silk, 70% alpaca, 30% silk, 167 m/ 50 g)  Needles : a set of 2.5 mm (US 1 1/2) DPNs or circular needles if you prefer Magic Loop method like me Gauge: 16 stitches and 22 rows = 5 cm (2 inches) To fit an average woman hand Intermediate knitting skills required LEFT MITTEN Cast on 54 stitches loosely on size 2.5 mm double pointed needles or a circular needle if you like knitting with magic loop method like me. I used the long-tail method to cast on. You can place a marker (beginning of the round) if you want, the

Saving A Curling Scarf.

Don't you just hate it when a piece you've spent hours working on doesn't turn out the way you imagined it? It looks like this... ...when it should be more like this. After just a couple of rows into the Trellis scarf I noticed the cast on edge started to roll upwards ever so slightly. As I continued to knit the curling got worse and worse until it seemed to calm down when the scarf measured 10 cm or so from the CO edge. I didn't really stress much about it thinking it would be easily fixed later on and continued to knit further. Halfway through knitting the scarf I faced another problem with the scarf. The CO edge still rolled up and now the sides started to curl inwards. So badly that the scarf lost more than half of it's width. I hate it when it happens. If this was something I designed myself I could maybe live with the mistake, but when it's a pattern that is published I would assume such things would have been fixed. Or at least